User Guide of iMyFone LockWiper

Part 1: Get Started

Forgot your iPhone passcode? Or it is disabled as you entered the wrong passcode so many times? iMyFone LockWiper can help you easily and quickly unlock iPhone/iPad without a passcode. It can remove all types of screen lock without any hassle!


1. Please be aware that all data on your device will be erased after password remove.

2. Your iOS version will be updated to the latest one.

3. Please make sure your device is connected to your computer all the time.

remove iphone screen lock

Part 2: Unlock iPhone without Password

Step 1: Launch iMyFone LockWiper

Launch LockWiper and click “Start” to begin the process.

remove iphone screen lock

Connect your iPhone/iPad to your computer.

Note: If your device cannot be recognized, please check your USB connection and re-plug in to try again. If it’s still unrecognized, then open iTunes and check whether iTunes can recognize it.

connect idevice to pc

 enter Recovery mode under Standard mode

Step 2: Put Your Device in DFU/Recovery Mode

Simply choose your device model “Other iDevices” , “iPhone 7/7 Plus” or “iPhone 8/8 Plus/X” on the top bar. Then follow the instruction on how to put your device into DFU mode.

dfu mode

If your device cannot enter DFU mode, please try Recovery Mode by clicking on “put your device into Recovery Mode” at the bottom.

Then choose your device model “Other iDevices” , “iPhone 7/7 Plus” or “iPhone 8/8 Plus/X” on the top bar to see the instruction.

recovery mode

Please wait a few minutes for it to finish. Once done, you can go to the next step.

Step 3: Download Firmware Package

Before downloading the firmware package, please check your device model auto-detected by the program or correct it manually if it is wrong. Then click “Download.”

If it fails to download, you can click “Copy” to download the firmware package in a browser.

If you already downloaded the firmware package on your computer, click “Select” to add it in.

download firmware package

After the firmware package is downloaded, click on “Start to Verify.”

verify firmware package

If the verification succeeds, then go to the next step.

Step 4: Unlock Screen Passcode

Click on “Start Unlock” to begin the unlocking process.

verification success

Please read the notice carefully and enter “000000” to double confirm you are agreeing to unlock your device, then click “Unlock.”

confirm unlock

Just in a few minutes, the lock will be removed from your device.

removing screen lock

Now it’s done! Your iPhone/iPad screen passcode is successfully unlocked!

unlock is complete