"I'm using an iPhone XR for many months without any issues. I recently updated it to the latest iOS 14. It started to update but the problem is that my iPhone is stuck on update completed screen. I left the iPhone for a few hours to check if it gets updated, but nothing happened. I tried a few tricks but the iPhone is still stuck on that screen. Should I try any other method or restore it to resolve this issue?"

Most of the iPhone or iPad users update their devices from time to time. This is crucial because the latest iOS or iPadOS version contains fixes for software bugs along with the new features and improvements.

But if your device gets stuck on update completed, it can be a serious issue that needs to be resolved immediately. However, you don't have to panic and by using some workarounds, you can resolve the problem all by yourself.

Reasons Why Your iPhone/iPad Stuck on Update Completed

You may want to know why you encounter iPhone stuck on update completed error during the update. While it is tough to specify the reason, we will offer a few of them that you can check.

  • If the iPad or iPhone overheats during the process, it may be stuck on an update completed screen.
  • Do you check the storage space on your device? Low storage on it may also lead to this error.
  • The corrupted apps and data might be the reason for this error.

Before you start, make sure that your device is connected to a stable Wi-Fi network because the weak connection will freeze your iPhone or iPad on an update completed screen.

Fix "Update Completed, Your iPhone/iPad Was Updated Successfully" Stuck

The solutions given here are effective in fixing the "stuck on update completed" error. You can easily use the methods given here and fix this issue without any help from the professional.

Success Rate Difficulty Required Time Data Loss What Can Be Fixed
Force Restart 50% Easy Short No A few software issues
iMyFone Fixppo 100% Easy Short No All system/software issues
Recovery Mode 80% Complex Long Depends Some software issues
Apple Support 100% Complex Long Depends Most hardware/software issues

Way 1. Force Restart Your iPhone/iPad (50% success rate)

Sometimes, the problematic apps on your device may cause an "update completed, your iPhone was updated successfully" stuck error. Force restarting the device will eliminate minor software issues.

iPhone 8 and later models: Press and release the volume up button and then volume down button. Now press and hold the power button until your iPhone restarts.


iPhone 7 and 7 Plus: Press and hold the power button and volume button until you see the Apple logo.


iPhone 6, 6 Plus and earlier: Press and hold the power button and home button until you see the Apple logo.


Way 2. Fix iPhone/iPad Stuck on Update Completed without Data Loss (100% success rate)

When you use other methods to fix this issue, you might lose your device data during the process. If you don't want to lose data, use a professional third-party tool.

iMyFone Fixppo is a powerful tool that not only fixes all the iOS issues but also makes sure that those issues don't occur again.

  • It can fix various kinds of iOS or iPadOS issues with a 100% success rate. The developers have used the latest technology to create iMyFone Fixppo and thus it comes with the highest success rate.
  • All iOS devices and iOS/iPadOS versions (including iOS/iPadOS 14) are well supported.
  • It only requires 3 simple clicks to perform the fix, so you do not need to be tech-savvy.
  • It is highly recommended by some trusted media sites.

part of tech sites

Download and install Fixppo on your computer before starting.

Windows version    Mac version

Step 1: Click on Standard mode and click Next. Connect your iPhone or iPad to the computer.

 connect your device to your computer

Note: You need to put it in DFU or Recovery mode if your iPhone is not detected. You can put the device in DFU or Recovery mode with the instruction given on the screen. The iPhone or iPad will automatically get detected by Fixppo once it enters the DFU or Recovery mode.

Step 2: Fixppo will show all the available firmware versions once the device gets detected. Now select the relevant firmware version and click Download. The firmware will be verified and the software will be extracted.

download firmware under Standard Mode

Step 3: Check the information and click on the Start button for starting the fixing process. Until the process is over, you cannot use the device or unplug it from the computer. After the process completes, the iPhone will restart normally.

finished fixing your device

It doesn't matter whether the iPhone or iPad is stuck on update completed issue or it is facing any other issues, iMyFone Fixppo will resolve the issues with ease. Before downloading and installing the latest trial version, you are also allowed to check other users' feedback.

user feedback

Way 3. Fix iPhone/iPad Stuck on Update Completed via Recovery Mode (80% success rate)

You can also fix this issue on your iPhone or iPad by putting it in the recovery mode. Please note that the restore option will erase your data.

Step 1: First, connect your device to the computer and open iTunes.

Step 2: Put your device in recovery mode. You will see a message - iTunes has detected an iPhone in recovery mode. Click OK.

Step 3: If asked, choose "Update" or "Restore". You can reinstall iOS on your device without erasing the data.

Once the update process is finished, set up your device and use it normally.


Way 4. Contact Apple Support Center (100% success rate)

If none of the above methods has helped you in resolving this issue, you need to contact the Apple Support Center to check the hardware.

You can begin your support request online so that you get connected to an expert without wasting the time. Explain your issues to them to get a specific solution according to your situation.

This is a 100% success rate solution to fix iPhone stuck on update completed error because if your device is in a warranty period, you can also get it replaced.



After viewing the solutions in this article, you must have got an idea of what to do when your iPhone or iPad gets stuck on update completed. Follow the instructions carefully to resolve this issue. If you want more help in this regard, just tell us via the comment section below.

Windows version    Mac version