While the FRP feature has its benefits, it also came with disadvantages. If you happen to forget the password for the Google ID on your Android device, resetting the device becomes a little bit harder. It is possible to perform an FRP bypass Google account. This means that resetting the Android device without a password is not entirely impossible. In this article, we will show you how to bypass FRP Google account.
What's FRP Bypass
The Google account FRP bypass refers to the process of getting rid of Google’s FRP lock without using the password for the Google ID on the smartphone. To bypass FRP android, a third-party tool is generally necessary. In this article, we will show you the top 3 ways you can use to bypass Google account FRP.
How to Perform FRP Bypass Using Easy Unlocker
The best way to perform Google FRP removal is to make use of a tool known as iMyFone LockWiper (Android). Unlike other tools, the tool is extremely easy to use. Also, it supports almost every Android device. It has already been tested on 6000+ Android devices, running Android 2.3 to 9.0, and proven to work on all the devices.
LockWiper (Android) Main Features:
- Quickly remove FRP lock from Samsung device so you can set up your device without verification
- Be able to access all the features available on your device after bypassing
- Promise a success rate of more than 98% as it provides specific fixes for each device
- Tech knowledge is not necessary for you to be able to use the tool
- Provides a free trial version for you to check whether your device is supported
How to Bypass Google FRP without Password Using LockWiper (Android)
Step 1: Open LockWiper (Android) after installation and tap Remove Google Lock (FRP). On the next screen click the Start button and then connect your device to the PC using your USB cable.
Step 2: Select your device name and follow to put your device into recovery mode. Then select the PDA, your country, and carrier, and then tap Download.
Step 3: When it finishes, click Start to Extract to unpack the downloaded package.
Step 4: Simple click the buttons shown to put your device into the downloading mode. Once done, LockWiper (Android) will install the package on your device.
Step 5: When it finishes, it shows you to enable USB debugging and the OEM unlock. Just follow it.
Step 6: Then reset your Android device and then put the device into downloading mode again.
Step 7: After it automatically downloads a frimware package, click Start to Extract. When it finishes, LockWiper (Android) will automatically remove the FRP lock from your device.
It’s not difficult to make it if you simply follow the step-by-step onscreen guide. Why not download its free trial to check?
How to Bypass Google FRP Account Using OTG Cable
The second way to perform FRP lock bypass is using OTG cable, which is not recommended. So before you try, here are some limitations of this way that you should learn.
- You should prepare a USB drive and an OTG cable (this is different from a USB cable).
- There is no guarantee that the method will work on your device. It just works for some specific devices.
Step 1: Using your computer, visit this link to download a third-party apk to help you with the FRP bypass.
Step 2: Copy the downloadeded apk to your USB flash drive.
Step 3: Turn on your Android device on which you want to perform the FRP lock bypass. Try to follow the setup, when it asks you to verify your Google account, connect the USB flash drive to your device. For this, you will need to use an OTG cable.
Step 4: Once the file manager app pops up on your device, locate the apk and then install it on your device.
Step 5: When the pop-up “Install blocked” appear, click “SETTIINGS”.
Step 6: Then check “Unknown sources”. Tick “Allow this installation only” and click “OK”.
Step 7: Click “INSTALL” and it will start install the apk on your device. When it finishes, click “OPEN”.
Step 8: Now find the “Backup and reset” option from your device settings. Confirm to erase everything from it.
Step 9: Finally, your device should reboot normally. You now can set it up without verifying any account.
How to Perform FRP Lock Bypass without OTG
Before you try to figure it out, you’d best learn some of this way’s cons because it’s not easy to perform.
- The method works on Samsung devices only. There is no guarantee it can work on newer Android versions.
- You need to be able to access to your device settings.
- The steps may be different for different device model. Sometimes, it may be hard for you to complete the whole process.
- You should have an Samsung account.
Step 1: Visit this link to download and install SideSync on your PC. Run SideSync on your computer.
Step 2: Turn on your Android device and follow to set it up. When you see the “Verify your account” page, connect your device to the computer using a USB cable.
Step 3: On the popup that appears on your Android device, select Chrome. Accept all terms and click “NO, THANK YOU” to set up Chrome.
Step 4: In the Google searcher, type in download.hardreset.info.
Step 5: Open Samsung folder and then Samsung Bypass Google app and click OK to confirm downloading.
Step 6: Go back to the following screen and click OK. Then enter Galaxy Apps.
Step 7: Click Agree then. Then click Apps Searcher.
Step 8: Type ES File Explorer in the search bar and tap on the right app. Click Install for the explorer app.
Step 9: Sign into a Samsung Account. Tap Install again and then Accept and Download.
Step 10: When it finishes downloading, tap Open button.
Step 11: Select Download from the top and open the Samsung Bypass Google app.
Step 12: Click Install from the pop-up Properties window. Then click SETTINGS option when you’re told Install blocked.
Step 13: Tap OK for the Unknown sources and click Install then.
Step 14: Wait for it to finish and you can click OPEN. You now can access your device settings.
Step 15: From the device settings, find and confirm Backup & Reset to erase everything from your device. When it’s done, you now can set up the device without entering the Google account.
If you cannot access all the features on your Android device because the smartphone has the FRP lock, the solutions in this article are ideal for you. Although you can use all the solutions outlined above to bypass Google account FRP, LockWiper (Android) is a much better solution as it has less requirements. It has the ability to perform Google FRP removal on all various devices. On top of being swift, the tool can be used by anyone, irrespective of whether they have tech knowledge or not.