Solutions to ‘Your Computer was Unable to Start’ Error

In the age of technology, computers have become the basic necessity of everyone. So whenever some random errors occur in the operation of computers, users may easily panic. Have you ever come across "Your computer was unable to start" error in Windows 10/8/7? It can be one of the worst experiences.

This error is generally because of the presence of inappropriate files on the computer. If some files are corrupted, your device will demand startup backups, again and again, leading to this hectic error. What’s worse, it can ruin all your essential data. But relax, we're here to sort out all your problems.

In this article, the best data recovery software called iMyFone AnyRecover will be recommended to extract data from the "crashed" computer and then some effective ways will be offered to get rid of the "Your computer was unable to start" error.

Extract the Data From Your Computer First With AnyRecover

Whenever your computer displays the "Your computer was unable to start" error, the first thing that comes to your mind may be losing your important data. As data loss can cause huge troubles, you really need to extract all your data from your crashed computer in the first place to prevent the “disaster” from happening.

It sounds a little complicated to do but with iMyFone AnyRecover, everything will become a lot easier. Included in the top-notch data recovery software list, AnyRecover aims to tackle all the issues related to data loss. In this case, it will help extract all the data from your computer without any loss.

To extract data from a computer unable to start, follow the steps below:

Step 1.Prepare for Computer Crash Recovery

You'll need another working computer and a blank USB drive or CD/DVD.

Step 2.Create a Bootable Drive

1. Download, install and launch AnyRecover on the working computer. Choose "Recover from crashed computer". Click on "Start" to proceed.

You'll get a message saying "create a bootable drive to recover data when Windows system is unable to launch". Make sure the USB drive or CD/DVD is connected to the working computer. Hit "Start" to move on.

2. From the two options available for creating a bootable drive, select one and click "Create" to begin.

3. A message will then alert that this operation will format your USB drive. Make sure that you've backed up your important data, then click "Format". Then this program will start to download firmware and format the USB drive or CD/DVD.

4. When the formatting is completed, it will start to create bootable drive. Once the bootable drive is created successfully, you can move on to restart your crashed computer following the instructions shown on the interface.

Step 3.Recover Data from Crashed Computer

1. Select a location where you want to retract your data, click on the "Start" button.

2. AnyRecover will then begin to scan the location for all data recoverable.

3. After the scanning is done, you can preview the files freely and select what you want to get back.

Easy Ways to Fix "Your Computer Was Unable to Start" Error

Fix 1. Boot to the Safe Mode

The best way to eliminate the relevant error is to unburden a load of drives from your computer. So on the onset of "Your computer was unable to start" error, the first thing is to boot your computer to the safe mode.

Step 1: Restart your computer first.

Step 2: Go to Troubleshoot, click the Advanced Options, open the Startup Settings, and then Restart.

Step 3: After seeing the Startup Settings, choose one from Enable Safe Mode, Enable Safe Mode with Networking, and Enable Safe Mode with Command Prompt.

Fix 2. Run SFC

Whenever you came across a notification on your screen that your computer is unable to start, you can choose to trigger the system file checker, and everything will get back to its normal position.

Step 1: If you've Windows 10 or Windows 8.1 on your computer, the first step is to run the DISM abbreviated as Device Image Servicing Management.

Step 2: Type the given command and press the "Enter" button.

DISM.exe /Online /Cleanup-image /Restorehealth
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

(Replace the C:\RepairSource\Windows with the location of your repair source.)

Step 3: Get the command prompt and enter the given text in the box and press the "Enter" button.

sfc /scannow

Fix 3. Launch Startup Repair

Startup Repair is an intrinsic tool present in Windows, which prevents those files that hinder the Windows from normal startup.

Step 1: Insert any DVD or DVD-ROM into your computer.

Step 2: Go for the Control Panel and click Backup and Restore (Windows 7).

Step 3: Click the Create a system repair disc and follow all instructions on the screen.

Step 4: Put the inserted disc into the optical drive. Restart the device to boot the drive. Change the settings in the BIOS if the booting of your drive isn't successful.

Step 5: Now go to the Install Windows for setting up the necessary tools such as language, time, and the type of keyboard. Click "Next".

Step 6: You'll see the next screen with an option of "Repair Your Computer". Don't click the "Install now".Click "Next" and go for the "Startup Repair" to treat the error.

Fix 4. Reinstall Your Windows

If you've tried all methods and still unable to treat the error, the only solution left is to reinstall your windows.

Step 1: Create the installation media of your windows on an empty USB.

Step 2: Connect that USB to your computer. Search for the boot options, and set your USB in the boot option.

Step 3: Save the changes you've made and restart your device.

Step 4: Select the option of USB, choose Install Now and then Install Windows only.

Final Words

You may treating the error of "Your computer was unable to start" as quite challenging, but we're pretty sure that after checking the solutions mentioned above, you'll resolve this issue in seconds. Besides, don't forget to try iMyFone AnyRecover to extract and recover your essential data for this case and also more other cases of data loss. It will never let you down.