[2024] How to Fix iPad Stuck in Reboot Loop in 4 Solutions?

Category: iPhone Issues

July 26, 2024 3 mins read

When you turn on your iPad, instead of functioning normally, the iPad stuck in reboot loop, preventing you from using any features.

To get your iPad back to work and stop it from showing Apple logo on and off, keed reading to find out the 4 solutions.

To fix iPad stuck in boot loop, below are 4 methods. Before heading to each solution, you can have a quick look at the comparison table below.

Method	Fix iPad Restart Loop Without Losing Data	Success Rate	Consumed Time
iPadOS System Repair Tool		99.99%	10-15 minutes
Force Restart		40%	15-20 minutes
iTunes Repair		50%	1-1.5 hours
DFU Mode		60%	1.5-2 hours

1 Fix iPad Stuck in boot Loop with iPadOS System Repair Tool

The right tool to fix iPad stuck on Apple logo loop without restoring is iMyFone Fixppo, which can get iPad out of boot loop without erasing any of your iPad data in 10 minutes.

When faced with a critical situation that requires you to get into the iPad immediately, Fixppo will give you immediately access to your iPad in 3 simple clicks, easily fix when iPad won't turn off.

iPad Reboot Loop Fix Tool:

• Easily fix iPad stuck in boot loop issue without losing iPad data.
• Help to solve all kinds of iPad problems including iPad stuck in white screen, iPad black screen, iPad screen shows battery with red line, etc.
• The 99.99% success rate promises to get your iPad back to function, enabling you to turn on the iPad again.
• Support to 1 click enter/exit recovery mode on iPad fo free.
• Compatible with all iPad models and iPadOS versions including the latest iPadOS 17/18 beta.

Stop worrying about this iPad restart loop problem, download Fixppo now for it to help to get your iPad out of boot loop trouble and turn on the iPad.

Step 1: Download and install the program to your PC, then launch and connect it to the computer with the USB cable.

Try It Free

Step 2: From the interface, choose the Standard Mode, which can fix iPad keeps restarting Apple logo issue without losing data.

Step 3: The available firmware version will be provided when your iPad model is detected. You can click the Download button to get it, which won't take long.

Step 4: When the firmware is downloaded, you can click the Start Standard Repair button, Fixppo will begin to repair your iPadOS system.

In a few minutes, your iPad will stop looping the Apple logo and restart itself. Whatever the reasons that cause your iPad to boot loop randomly, you can rest assure now and use your iPad again with Fixppo!

Try It Free

2 Force Restart iPad to Fix iPad Stuck on Apple Logo Loop

Force restart is regarded as one of the easiest ways to fix common iOS/iPadOS problems including this iPad stuck in reboot loop issue. You can try this force restart method when your iPad frozen on Apple logo loop.

As the force-restarting method varies from device to device, you can follow different steps here:

3 Use iTunes to Restore iPad in Boot Loop (Data Loss)

iTunes can be another helper if your iPad stuck in restart loop. By restoring iPad with iTunes, you can use your device again.

However, please notice that this method will wipe off all your iPad data and restore it to factory settings. If you're aware of this drawback, please proceed.

Step 1: Please connect your iPad to the PC, launch iTunes and begin to put iPad in recovery mode:

Step 2: Now, you'll get a pop-up that says your iPad is detected in recovery mode. Click on the Restore button to confirm the action. When it is restored, please check if the issue that iPad keeps restarting with apple logo is fixed.

Tips

If your iPad stuck in recovery mode, you can try Fixppo to exit recovery mode on iPad in 1 click for totally free!

4 Enter DFU Mode to Repair iPad in Reboot Loop (Data Loss)

To solve iPad turning on and off loop problem, another method is by putting it into DFU mode. As an advanced method, DFU mode goes deeper into your iPad system and can fix more serious problems compared to the recovery mode.

As it requires to use iTunes as well, you should make a backup first if you're sure to employ this method.

Step 1: Please connect your iPad to the PC, launch iTunes and start to put your iPad into DFU mode:

Step 2: If your iPad screen is still in black screen, it means it has entered the DFU mode. Now, click the OK then the Restore button to restore your iPad with iTunes. For iPhone/iPad won't go into DFU mode, please follow steps mentioned once more.

Go check if your iPad reboot loop problem is fixed. If not, you can repeat the steps or use Fixppo directly.

iPad Stuck on Apple Logo Loop Fix Tool

Both recovery mode and DFU mode can fix iPad boot loop issue, but at the cost of erasing iPad data. To retain all your important content, it's recommended to try Fixppo, which can protect all iPad data while getting it out of reboot loop.

Try It Free

For iPad flashes Apple logo then black screen, there are some reasons you need to know to make some preventions:

If your iPad keeps restarting Apple logo when it is charging or when it has a low battery, here is a solution that is worth trying, which has been proven to be helpful for some people.

That's all solutions for your iPad stuck in reboot loop. Also, you can learn why your iPad flashing Apple logo then turnded off, so you can take some preventions.

And if you don't want to fix this iPad problem manually and want to retain all your data, just try this iPadOS system repair software! It can save you time and energy greatly!

Try It Free Buy Now

Melvin Cooper

(Click to rate this post)

Generally rated 4.9 (256 participated)

Rated successfully!

You have already rated this article, please do not repeat scoring!